/* * @Description: 存储模块-svc层 * @Author: yangsw * @Date: 2021-05-20 18:35:04 * @LastEditTime: 2023-11-14 14:02:57 * @LastEditors: LiDa * @Reference: */ #ifndef H_SVC_FLASH_H #define H_SVC_FLASH_H #include "sr_stddef.h" #include "pulse/svc/svc_pulse.h" /*flash数据备份使能*/ #define FLASH_BAK_ENABLE 1 #define FLASH_W25X_ENABLE 1 //使用外部w25x spi flash #define EEPROM_P24C_ENABLE 0 #define Size_Day_Usage sizeof(S_Flash_Day_Usage) #define FLASH_PARAM_PART_NAME "spiFlh" //参数分区名称 /*==================== FAL partition table ==================== | name | flash_dev | offset | length | ------------------------------------------------------------- | spiFlh | w25x | 0x00000000 | 512*1024 | =============================================================*/ /*说明：将整个w25 spi flash存储（512K）设置为一个分区,名称为param， 由于w25的实际物理起始地址为0，所以param分区内的偏移地址与实际物理地址一一对应*/ /*参数分区内，各部分的偏移地址，单位为字节*/ #if FLASH_W25X_ENABLE #include "sr_bsp_w25x.h" #define FLASH_REPEAT_READ_NUM 2 #define FLASH_REPEAT_WRITE_NUM 2 #define FLASH_DEVICE_PARA_ADDR (gw_u32)0x00000000 #define FLASH_DEVICE_SECURITY_ADDR (gw_u32)0x00001000 #define FLASH_USAGE_ADDR (gw_u32)0x00002000 #if FLASH_BAK_ENABLE #define FLASH_DEVICE_SECURITY_BAK_ADDR (gw_u32)0x00003000 #define FLASH_DEVICE_PARA_BAK_ADDR (gw_u32)0x00004000 #define FLASH_USAGE_BAK_ADDR (gw_u32)0x00005000 #endif #define FLASH_USAGE_DAY_START_ADDR (gw_u32)0x00006000 #elif EEPROM_P24C_ENABLE #include "bsp_eeprom_p24c.h" #define FLASH_DAY_USAGE_SIZE sizeof(Flash_Day_Usage_Struct) //一天的日用量占用空间大小 #define FLASH_DAY_USAGE_ADDR 0x00000000 //存储日用量的起始地址 #define FLASH_DAY_USAGE_TOTAL_SIZE DAY_USAGE_MAX_NUM*FLASH_DAY_USAGE_SIZE //存储日用量的总占用空间大小 #define FLASH_DAY_USAGE_END_ADDR FLASH_DAY_USAGE_ADDR+FLASH_DAY_USAGE_TOTAL_SIZE //存储日用量的结束地址 #define FLASH_MONTH_USAGE_SIZE sizeof(Flash_Month_Usage_Struct) //每月的月用量占用空间大小 #define FLASH_MONTH_USAGE_ADDR FLASH_DAY_USAGE_END_ADDR+1 //存储月用量的起始地址 #define FLASH_MONTH_USAGE_TOTAL_SIZE MONTH_USAGE_MAX_NUM*FLASH_MONTH_USAGE_SIZE //存储月用量的总占用空间大小 #define FLASH_MONTH_USAGE_END_ADDR FLASH_MONTH_USAGE_ADDR+FLASH_MONTH_USAGE_TOTAL_SIZE //存储月用量的结束地址 #define FLASH_HISTORY_USAGE_INDEX_ADDR FLASH_MONTH_USAGE_END_ADDR+1 //存储历史日用量和月用量的索引地址 #define FLASH_DESEN_FLOW_ADDR FLASH_HISTORY_USAGE_INDEX_ADDR+sizeof(Flash_Usage_Index_Struct)+1 //存储密集流量的起始地址 #define FLASH_DEVICE_SECURITY_ADDR FLASH_DESEN_FLOW_ADDR+sizeof(Flash_Dense_Flow_Struct)+1 //设备安全相关参数的存储地址 #define FLASH_DEVICE_PARA_ADDR FLASH_DEVICE_SECURITY_ADDR+sizeof(Flash_Device_Security_Struct)+1 //设备其他参数的存储地址 #define FLASH_DEVICE_USAGE_ADDR FLASH_DEVICE_PARA_ADDR+sizeof(Flash_Device_Para_Struct)+1 //设备总用量信息的存储地址 #if FLASH_BAK_ENABLE #define FLASH_DEVICE_SECURITY_BAK_ADDR FLASH_DEVICE_USAGE_ADDR+sizeof(Flash_Usage_Info_Struct)+10 #define FLASH_DEVICE_PARA_BAK_ADDR FLASH_DEVICE_SECURITY_BAK_ADDR+sizeof(Flash_Device_Security_Struct)+1 #define FLASH_DEVICE_USAGE_BAK_ADDR FLASH_DEVICE_PARA_BAK_ADDR+sizeof(Flash_Device_Para_Struct)+1 #endif #endif //#define MaxTotalUsage 99999999 //单位L //flash已被使用标志 #define FLASH_SIG_USED 0x5C typedef struct{ // gw_u8 pu8ServerIp[4]; // gw_u8 pu8ServerIpSpare[4]; // gw_u16 pu16ServerPort; // gw_u8 pu8Apn[20]; /* ASCII 码 xxx.xxx.xxx.xxx,xxxx IP 和端口 用,分开*/ gw_s8 IpInfo[32]; /* APN信息*/ gw_u8 u8Apn[32]; /* PLMN*/ gw_u8 u8Plmn[10]; /* Band*/ gw_u8 u8Band; /*通讯模组IMEI*/ gw_u8 pu8Imei[15]; /*通讯模组IMSI*/ gw_u8 pu8Imsi[15]; /*通讯模组iccid*/ gw_u8 pu8Iccid[20]; /*NB 模组版本*/ gw_u8 pu8NbVer[32]; }S_Flash_Nb_Info; //#pragma(1) typedef struct{ gw_u8 u8Sig; /*时间校准标志*/ gw_u8 time_calibrate_flag; /*设备类型 1：水表， 2：气表， 3：热量表， 4：... */ gw_u8 pu8MeterType; /*设备子类型 2 无磁远传小表*/ gw_u8 pu8MeterChildType; /*设备计量模式*/ gw_u8 pu8MeterDetectModel; /*厂家编号*/ gw_u8 pu8FactoryNum; /*协议版本*/ gw_u8 u8ProtocolVer; /*表号*/ gw_u8 pu8MeterNum[7]; /*产品id*/ gw_u8 product_id[16]; /*运行密钥*/ gw_u8 pu8RunKey[16]; /*软件版本*/ gw_u8 pu8SoftVer; /*校验和*/ gw_u8 u8CheckSum; }S_Flash_Device_Security; typedef struct{ gw_u8 u8Sig; /*超大切断流量，（参数可由后台设置）*/ gw_u32 u32LargeFlowCutPoint; /*反流切断流量，（参数可由后台设置）*/ gw_u32 u32NegFlowCutPoint; /*超大流量持续时间,单位：分，*/ gw_u8 u8LargeFlowDuration; /*反流持续时间,单位：分，断*/ gw_u8 u8NegFlowDuration; /*电压报警阀值,单位：0.01V*/ gw_u16 u16BatAlarmVolt; /* 上报重连次数*/ gw_u8 u8ResendTimes; /*上报周期，单位：秒，*/ gw_u32 u32ReportCycle; /*通讯间隔，单位：小时，*/ /*上报区间*/ gw_u16 u16ReportInterval; gw_u8 u8CommCycle; /*周期上报离散起始 时间*/ gw_u8 u8DiscreteStartTime[6]; /*周期上报离散结束 时间*/ gw_u8 u8DiscreteStopTime[6]; /*周期上报离散估长时间*/ gw_u8 u8DiscreteStepTime; /*终端启停设置*/ gw_u8 u8StartStopEnable; /*密集流量开始时间，默认值0,即0点开始*/ gw_u8 u8DenseStartTime; /*周期采样间隔*/ gw_u8 u8HourPeriodTime; /*密集采样间隔*/ gw_u16 u16DensePeriodTime; /*上报重连等待时间 */ gw_u8 u8ResendWaiteTime; /*密集流量使能*/ gw_u8 u8DenseEnable; /*PN 脉冲常数 1-1L/P； 2-10L/P； 3-100L/P； 4-1000L/P；*/ gw_u16 u16PluseEqu; /*设置最大计量数 最大为 8 位*/ gw_u32 u32MaxTotalUsage; /*设置表底数*/ gw_u32 u32BaseUsage; /*nb信息*/ S_Flash_Nb_Info s_nb_info; gw_u8 u8Enable_StaDaySaveTime; gw_u8 u8StaDaySaveTime[3]; gw_u8 u8RstPowerCnt; gw_u8 u8NRstCnt; gw_u8 u8LPowerCnt; gw_u16 u16Netcnt; gw_u8 u8CheckSum; }S_Flash_Device_Para; //24字节 typedef struct{ gw_u8 u8BatAlarm; //电池告警 gw_u8 u8MagneticAlarm; //磁告警 gw_u8 u8LargeFlowAlarm; //过流告警 gw_u8 u8LargeFlowStartTime[6]; //过流告警开始时间 gw_u16 u16LargeFlowUsage; //最大流量 gw_u8 u8NegFlowAlarm; //反流告警 gw_u8 u8NegFlowStartTime[6]; //反流选区开始时间 gw_u16 u16NegFlowUsage; //反流最大流量 gw_u8 u8LightAlarm; //光报警 gw_u8 u8PulseAlarm; //脉冲报警 gw_u8 u8MechSepar; //机电分离报警 gw_u8 u8Measurement; //计量报警 lida add code }S_Flash_Usage_Alarm; //28 typedef struct{ gw_u32 u32TotalUsage; gw_u32 u32TotalUsagePosMidnight; gw_u32 u32TotalUsageNegMidnight; gw_u16 u16MaxUsage; gw_u8 u8MaxUseTime[6]; gw_u8 u8InfoTime[6]; gw_u16 u16BatVol; }S_Flash_Real_Usage; //107+96=203 typedef struct{ /*密集流量采集开始标志*/ gw_u8 u8StartFlag; /*密集流量采集存储指针*/ gw_u8 u8Index; /*密集流量下个到点时间*/ gw_u16 u16NextTime; gw_u8 u8StartTime[6]; gw_u8 u8RecordNumb; gw_u16 u16RecordUsage[48][2]; }S_Flash_Dense_Usage; //98 typedef struct{ /*小时存储标志*/ gw_u8 u8HourSaveFlag; gw_u8 u8RecordNumb; gw_u16 u16RecordUse[48]; }S_Flash_Hour_Usage; //10+98+205+28+24 typedef struct{ gw_u8 u8Sig; gw_u8 u8SigReport; /*天存储标志*/ gw_u8 u8DaySaveFlag; gw_u8 u8StartTime[6]; S_Flash_Real_Usage s_real_usage; S_Flash_Hour_Usage s_hour_usage; S_Flash_Dense_Usage s_Dense_usage; S_Flash_Usage_Alarm s_usage_alarm; gw_u8 u8CheckSum; }S_Flash_Day_Usage; //48+10+98+205+28+24+24 typedef struct{ gw_u8 u8Sig; /*用量储标志*/ gw_u8 u8Usage_Info_SaveFlag; /*当前时间时间戳*/ gw_u32 pu32SystemTime; /*上一次系统时间戳 防止时间倒走时数据重复存储*/ gw_u32 u32LastSystemTime; /*总使用量*/ gw_u32 u32TotalUsage; /*正流总使用量*/ gw_u32 u32TotalUsagePos; /*返流总使用量*/ gw_u32 u32TotalUsageNeg; /*上一次记录时总使用量*/ gw_u32 u32LastHourUsage; /*上一次记录时密集流量总使用量*/ gw_u32 u32LastDenseUsagePos; /*上一次记录时密集流量返流总使用量*/ gw_u32 u32LastDenseUsageNeg; /*NB上报标志*/ gw_u8 u8NbReportFlag; /*上一次通讯成功的时间戳*/ gw_u8 u8LastUpdataTime[6]; /*上一次上报历史通讯成功的时间戳*/ gw_u8 u8LastHistoryUpdataTime[6]; S_Flash_Usage_Alarm s_usage_alarm; S_Flash_Day_Usage s_day_usage; gw_u8 u8CheckSum; }S_Flash_Usage_Info; typedef struct{ /*电压低导致的flash无法操作，1：读写失败，0：正常*/ gw_u8 u8flashCheckFail; S_Flash_Device_Security s_security; S_Flash_Device_Para s_para; S_Flash_Usage_Info s_usage_info; }S_Flash_Data; // void Svc_Flash_Lp(void); void Svc_Flash_Init(void); void Svc_Flash_Read_User_Data(void); void Svc_Flash_User_Data_Reload(void); void Svc_Flash_Power_On(void); void Svc_Flash_Power_Off(void); S_Flash_Data* Svc_Flash_Get_Data(void); S_Flash_Day_Usage* Svc_Flash_Get_Updata_Day_Usage(void); E_Result_State Read_Day_Usage(S_Flash_Day_Usage *day_usage,gw_u8 *ReadTime); void Svc_Flash_Read(gw_u8 *out_buff,gw_u32 read_addr,gw_u16 read_num); E_Result_State Svc_Flash_Write(gw_u8* data,gw_u32 write_addr,gw_u16 write_num); E_Result_State Svc_Flash_Write_Ota(gw_u8* data,gw_u32 write_addr,gw_u16 write_num); E_Result_State Svc_Flash_Write_Device_Security(S_Flash_Device_Security *security); E_Result_State Svc_Flash_Write_Device_Para(S_Flash_Device_Para *para); E_Result_State Svc_Flash_Write_Usage(S_Flash_Usage_Info *usage_info); E_Result_State Svc_Flash_Write_Day_Usage(S_Flash_Day_Usage *day_usage); E_Result_State Write_Day_Usage(S_Flash_Day_Usage *day_usage); void Svc_Flash_Update_Usage(SR_PULSE_FLOW_T *FlowData); void Svc_Flash_Check_Save_Dense_Usage(void); void Svc_Flash_Check_Save_30Min_Usage(void); void Svc_Flash_Check_Save_Day_Usage(void); void Svc_Flash_Check_Save_Usage(void); void Svc_Flash_Dense_Timer_Callback(void); void Svc_Flash_Base_Usage_Calibrate(gw_u32 BaseUsage); void Svc_Flash_Check_Save_30Min_Usage_Time_Calibrate(gw_u32 u32CurTime,gw_u32 CaliTime); void Save_Hour_Usage(gw_s16 s16Usage,gw_u32 u32StartTime,gw_u32 u32StopTime); void Svc_Flash_Upload_Para_Printf(void); #endif