/*****************************************************************************
 * Copyright (c) 2019, Nations Technologies Inc.
 *
 * All rights reserved.
 * ****************************************************************************
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Nations' name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY NATIONS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL NATIONS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ****************************************************************************/

/**
 * @file n32l40x_it.c
 * @author Nations
 * @version v1.0.0
 *
 * @copyright Copyright (c) 2019, Nations Technologies Inc. All rights reserved.
 */
#include "n32l40x_it.h"
#include "src/timer/svc/svc_timer.h"
#include "src/ir/svc/svc_ir_uart.h"
#include "src/nb/svc/svc_nb_uart.h"
#include "src/key/app/app_key.h"
#include "src/pulse/svc/svc_pulse_uart.h"
#include "src/log/svc/svc_log.h"
#include "src/test/app/app_test.h"
#include "src/bat/svc/svc_bat.h"
#include "src/rtc/svc/svc_rtc.h"
#include "src/cloud/svc/svc_cloud_protocol.h"
#include "src/pulse/svc/svc_pulse.h"
#include "src/cloud/svc/svc_cloud.h"
#include "src/lcd/svc/svc_lcd.h"

#include "sr_config.h"
/** @addtogroup N32L40x_StdPeriph_Template
 * @{
 */

extern __IO uint8_t TxCounter1;
extern gw_u8 pu8Data[];
extern uint8_t NbrOfDataToTransfer1;

/******************************************************************************/
/*            Cortex-M4 Processor Exceptions Handlers                         */
/******************************************************************************/

/**
 * @brief  This function handles NMI exception.
 */
void NMI_Handler(void)
{
}

/**
 * @brief  This function handles Hard Fault exception.
 */
void HardFault_Handler(void)
{
    /* Go to infinite loop when Hard Fault exception occurs */
    Svc_Log_Printf(LOG_ERROR, "%s", __FUNCTION__);
    while (1)
    {
    }
}

/**
 * @brief  This function handles Memory Manage exception.
 */
void MemManage_Handler(void)
{
    /* Go to infinite loop when Memory Manage exception occurs */
    Svc_Log_Printf(LOG_ERROR, "%s", __FUNCTION__);
    while (1)
    {
    }
}

/**
 * @brief  This function handles Bus Fault exception.
 */
void BusFault_Handler(void)
{
    /* Go to infinite loop when Bus Fault exception occurs */
    while (1)
    {
    }
}

/**
 * @brief  This function handles Usage Fault exception.
 */
void UsageFault_Handler(void)
{
    /* Go to infinite loop when Usage Fault exception occurs */
    while (1)
    {
    }
}

/**
 * @brief  This function handles SVCall exception.
 */
void SVC_Handler(void)
{
}

/**
 * @brief  This function handles Debug Monitor exception.
 */
void DebugMon_Handler(void)
{
}

/**
 * @brief  This function handles SysTick Handler.
 */
void SysTick_Handler(void)
{
}

/******************************************************************************/
/*                 N32L40x Peripherals Interrupt Handlers                     */
/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
/*  available peripheral interrupt handler's name please refer to the startup */
/*  file (startup_n32l40x.s).                                                 */
/******************************************************************************/
extern  void BSP_UartRecvTask(void);
extern  void BspIncTick(void);
extern  void SR_KeyScanTask(void);
/**
 * @brief  This function handles TIM1 update interrupt request.
 */
void TIM1_UP_IRQHandler(void)
{
    static unsigned char flag_ms=0;
    static unsigned short flag_s=0;
    
    if (TIM_GetIntStatus(TIM1, TIM_INT_UPDATE) != RESET)
    {
        TIM_ClrIntPendingBit(TIM1, TIM_INT_UPDATE);
        Svc_Timer_1ms_Callback();
        
        if(++flag_ms >= 10)
        {
          flag_ms = 0;
          
          BSP_UartRecvTask();
          //SR_KeyScanTask();
          
        }
        
        if(++flag_s >= 1000)
        {
          flag_s =0;
          
        }
        BspIncTick();
    }
}

#if  0
/**
 * @brief  This function handles USARTy global interrupt request.
 */
void LPUART_IRQHandler(void)
{
    gw_u8 u8Data;
    if (LPUART_GetIntStatus(LPUART_INT_FIFO_NE) != RESET)
    {
        u8Data = LPUART_ReceiveData();
        Svc_Pluse_Uart_Put_Data_Quene(u8Data);
    }
}


void UART4_IRQHandler(void)
{
    gw_u8 u8Data;
    if (USART_GetIntStatus(UART4, USART_INT_RXDNE) != RESET)
    {
        u8Data = USART_ReceiveData(UART4);
        Svc_Ir_Uart_Put_Data_Quene(u8Data);
    }
}



void USART1_IRQHandler(void)
{
    gw_u8 u8Data;
    if (USART_GetIntStatus(USART1, USART_INT_RXDNE) != RESET)
    {
        u8Data = USART_ReceiveData(USART1);
        Svc_Nb_Uart_Put_Data_Quene(u8Data);
    }
}

#endif

#if 0
void EXTI4_IRQHandler(void)
{
    if (RESET != EXTI_GetITStatus(KEY_INPUT_EXTI_LINE))
    {
        S_Key *ps_key;
        ps_key=App_Key_Get_Data();
        ps_key->e_keyPressType = E_KEY_IS_PRESS;
        EXTI_ClrITPendBit(KEY_INPUT_EXTI_LINE);
    }
}

void EXTI9_5_IRQHandler(void)
{

    if (RESET != EXTI_GetITStatus(EXTI_LINE6))
    {
        EXTI_ClrITPendBit(EXTI_LINE6);
    }
}
#endif


#if   0
void RTC_WKUP_IRQHandler(void)
{
    if (RTC_GetITStatus(RTC_INT_WUT) != RESET)
    {
        RTC_ClrIntPendingBit(RTC_INT_WUT);
        EXTI_ClrITPendBit(EXTI_LINE20);
        Svc_Rtc_Updata_Time();
        Svc_Bat_Timer_Callback();       
        Svc_Pulse_Timer_1s_Callback();
        Svc_Cloud_WakeUpCnt_Increase();
        Svc_Lcd_Cnt_Deal();
    }
}
#endif